HomeStandard stock list


Standard stock list

We also stock products not listed below, so please inquire.
We will reply regarding availability.


TEL:+81-78-431-1105
E-mail: nss@nunobiki-s.co.jp


Standard stock list

We accept orders for small lots: for sheets 1m x 2m, from 1 sheet; for coils, cut 1m and over.
Click the product no. to view a sample.

Product
No.
Material Thick
ness
Hole
Size
Mesh Hole
Center
(m/m)
Pattern Open
Area
(%)
Width
(m/m)
Length
(m/m)
P2 SUS304 0.15 0.25 4055 0.43 60°
Staggerred
30.7 200 Coil
P9 SUS304 0.2 0.35 670 1.05 60°
Staggerred
10.0 500 Coil
P14 SUS304 0.3 0.40 516 1.22 60°
Staggerred
10.0 1000 Coil
P15 SUS304 0.3 0.45 740 1.00 60°
Staggerred
18.2 1000 Coil
P18 SUS304 0.3 0.50 740 1.00 60°
Staggerred
22.6 1000 Coil
P19 SUS304 0.3 0.50 625 1.09 60°
Staggerred
19.0 1000 Coil
P19 SUS304 0.4 0.50 625 1.09 60°
Staggerred
19.0 1000 Coil
P19 SUS304 0.5 0.50 625 1.09 60°
Staggerred
19.0 400 Coil
P24 SUS304 0.5 0.60 502 1.21 60°
Staggerred
22.0 1000 Coil
P30 SUS304 0.5 0.75 525 1.19 60°
Staggerred
35.9 1000 Coil
P34 SUS304 0.6 0.80 330.8 1.50 60°
Staggerred
25.8 1000 Coil
P40 SUS304 0.5 1.00 330.8 1.50 60°
Staggerred
40.3 1000 Coil
P43 SUS304 0.5 1.00 186 2.00 60°
Staggerred
22.6 1000 Coil
P43 SUS304 0.8 1.00 186 2.00 60°
Staggerred
22.6 1000 Coil
P43 SUS304 1.0 1.00 186 2.00 60°
Staggerred
22.6 1000 2000
P47 SUS304 0.5 1.20 231 1.80 60°
Staggerred
40.4 1000 Coil
P49 SUS304 0.8 1.20 147 2.25 60°
Staggerred
25.8 1000 2000
P49 SUS304 1.0 1.20 147 2.25 60°
Staggerred
25.8 1000 2000
P54 SUS304 0.5 1.50 186 2.00 60°
Staggerred
50.9 1000 Coil
P55 SUS304 1.0 1.50 147 2.25 60°
Staggerred
40.0 1000 2000
P57 SUS304 0.8 1.50 82 3.00 60°
Staggerred
22.4 1000 Coil
P57 SUS304 1.5 1.50 82 3.00 60°
Staggerred
22.4 1000 2000
SS1 SUS304 0.5 0.3/4.0 83 1.40 S/L
Straight
15.6 400 Coil
SS2 SUS304 0.5 0.35/4.0 97.7 1.20 S/L
Straight
21.2 400 Coil
SS3 SUS304 0.7 0.4/4.0 76.1 1.55 S/L
Straight
18.8 400 Coil
SS4 SUS304 0.4 0.45/4.0 97.7 1.20 S/L
Staggerred
27.3 400 Coil